PLUNGER CARRIER, CAM AND PAWL DIFFERENTIAL
OUTER HOUSING, CAM AND PAWL DIFFERENTIAL
Direct. Hewland Interchange # FT 217.
BOLT AN5-20 USED WITH LOBRO/TRE CV JOINTS. Direct. Hewland Interchange #FT 2193. Also Staffs.
The Quaife Torque-Biasing differential behaves as an open differential until a loss of traction occurs at one wheel. When the loss of traction is sensed, the differential automatically biases up to 80% of the engine torque to the wheel with better traction (The description "torsen" is derived from Torque-Sensing.) The operation is automatic; no adjustment is required or desired on the differential. All adjustments are made simply with springs, sway bars, and shocks.
It has been proven that an Open Differential is faster on oval tracks than a spool, cam and pawl, or salisbury differential, as the open diff frees up the car to run fast on the straight, without binding in the corners. An aluminum Differential Housing can save as much as 7.5#. For classes requiring an open differential, the lighter weight insures faster acceleration and better braking.
NAS HARDENED WASHER FOR NAS TYPE RING GEAR BOLTS. FITS NAS BOLT INV-041483 Direct. Hewland Interchange #FT 2212.
CROSS PIN TO FIT FAST FORWARD ALUMINUM DIFFERENTIAL
NOTE: EARLY CROSSPINS REQUIRE TWO. DIFFERENTIAL CROSSPIN CIRCLIP WMST-053T
Direct. Hewland Interchange #HC8-2144. Flat Thrust Face.
Direct. Hewland Interchange #HC8-2143.
Direct. Hewland Interchange #HC8-2145. For Flat Side Gear.
Direct. Hewland Interchange #HC8-2146. Also Fits Staffs. (2 req)
REAR LAYSHAFT BEARING WMIN-028T; LATE STYLE FT, ROLLER BEARING
INTERLOCK PLUG 3/8-16 X 3/8; Hewland Part # FT2028
BEARING REAR PINION SHAFT; WITH GRUB SCREW PROVISION; Hewland Part # FT2291
DRIVEN GEAR NEEDLE BEARING; Hewland Part # FT2261
Hewland Part # FG229, "Top Hat". FGC replaces FGB. There are many different combinations of differential and sideplate for the FGB. Please call for specifics. TRACK INNER AND FIFTH GEAR THRUST WASHER FOR STAFFS/FSCCA/AND LATE FT.
BUSHING SELCTOR FINGER AMERICAN
Interchange # FT 2462, No Locktab Required, 5 Required
SHIM SELECTOR FORK VARIOUS SIZES - Minimum .110, Maximum .225, increments of .005
5/16" Size, 1.75" Length, 5/16x18 & 5/16 x 24 Thread. Hewland Part # FT2014
5/16" Size, 1.75" Length, 5/16x18 & 5/16 x 24 Thread. Hewland Part # FT2014